G-VA Polishing Flap Disc Set 115mm x 22.23mm
Click Image for Gallery
Introducing the G-VA Polishing Flap Disc Set, providing three 115mm flap discs & 2 compound bars for the processing of stainless steel from start to finish. In the blister pack contains:
1x G-VA Coarse Flap Disc
1x G-VA Fine Flap Disc
1x G-VA Felt Flap Disc
1x 110gr Bar Blue Compound
1x 110gr Bar White Compound
To start, process the work piece with the coarse G-VA Polishing flap disc followed by medium and fine.
The Gloss Polishing flap disc is always used with a corresponding polishing compound.
Step 1: Start with a pre-polishing compound (e.g. white by Unipol).
Step 2: Use a new Polishing flap disc with a high-gloss polishing compound (e.g. blue by Unipol) in order to obtain a high-gloss surface.
For the polishing of aluminium and non-ferrous metals, use a polishing compound especially for these materials (e.g. brown by Unipol).
With a reduced working speed of 4.500 rpm, better polishing results are achieved than with the angle grinder at full speed.