Weldturn BY50 Welding Turntable / Positioner 110V

WELDTURN BY50, BY100 & BY300 are inverter controlled positioners supplied with a stop/start foot control pedal. The front panel includes an on off switch, forward/ reverse switch & speed control knob. The turntables enables the positioning to any angle between horizontal & 90° by the use of the hand wheel which drives the worm gear. All internal gears are made from hardened steel for high performance, the lock off device prevents the table being knocked off angle. The table has 6 machined slots 75mm x 12mm (BY50) / 86mm x 13mm (BY100) / 115mm x 15mm (BY300) for mounting of jigs or a quick release chucks. The table is also scored every 25mm with a circular mark to assist in the setting up of jobs. Our smaller turn tables (BY50/100) are anti-electromagnetic, which reduces interference of Tig welding HF.

Please note the turntable, control box & foot pedal are included, all other items are optional extras.

Optional Extras:
CAP0514 – Adjustable Torch Support
CAP0512 – Weldturn Turnable Chuck 200mm For BY50 & BY100

• Rotation Speed 1 – 7 RPM
• Capacity (Horizontal) 50 Kg
• Capacity (Vertical) 25 Kg
• Tilt Angle 0 – 90°
• Tilt Mode Hand wheel (Worm Gear)
• Gear Box Double Reduction
• Foot Pedal Stop / Start
• Protection HF Interference
• Table Diameter 315 mm
• Max. Welding Current 350 Amp @ 60%
• Height 375 mm
• Width 430 mm
• Length 430 mm

WeldTurn Welding Turntable Sales Literature