Weld Star 80S-G Corten NiCu Mig Wire 1.0mm 15kg
£105.00
Product Description
Features and Applications
Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels.
Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion.
This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications.
Precision layer wound for superior wire feeding characteristics.
Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc.
Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A – B1 ; TsT52.3, S355K2W*
* Illustrative, not exhaustive list
| Standards |
| EN ISO 14341-A – G 50 4 C1/M21 Z3Ni1 |
| AWS A5.28 – ER 80S-G |
| Chemical Composition % (Typical) | |||||
| C% | Si% | Mn% | P% | S% | Cu% |
| 0.08 | 0.80 | 1.40 | <0.020 | <0.020 | <0.40 |
| Cr% | Ni% | Mo% | Al% | V% | Zr+Ti% |
| 0.25 | 0.80 | <0.05 | <0.200 | <0.030 | <0.15 |
| Mechanical Properties (Typical) | ||
| Tensile Strength | 630 MPa | |
| Yield Strength | 550 MPa | |
| Elongation | 22% | |
| Impact Strength | 60 J | |
| Test Temperature | -40ºC | |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
| Welding Parameters
| ||
| Ømm | Current (A) | Voltage (V) |
| 0.80 mm | 80-160 | 18-22 |
| 1.00 mm | 150-250 | 22-28 |
| 1.20 mm | 220-320 | 26-32 |
Shielding Gases
EN ISO 14175 – C1, M20, M21, M33
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
Technical Specifications
Standards
EN ISO 14341-A – G3Ni 1
AWS A5.28 – ER 80S-G