Kapio Red Side Vision S4 Helmet For Air

The excellent ergonomics provides perfect protection of the forehead, the ears and the neck, while keeping the weight under 460g.

Equipped with side vision in shade DIN 5 , the Kapio® provides a 160° vision to the welder, for improved safety and advanced comfort. These side vision are made out of transparent shade DIN 5 polycarbonate.
In each graphic version, the Kapio* is available with or without these side vision.

The Kapio® S4 is equipped with the longitudinal headgear with 4 settings: height, width, angle, and longitudinal adjustment for welders operating with corrective glasses.

The 4 arc sensors are associated to a very fast switching speed of 0.2ms for a flawless detection of the welding arc, with all welding processes.
With excellent 1/1/1/2 optical classes, the liquid crystals of the S4 provide a perfect vision of the fusion during welding.

Inside stepless knobs allow the welder to select the welding shade (from DIN 9 to DIN 13), to adapt the sensitivity of the 4 arc sensors, and to adjust the delay according to the welding application.

The Kapio® shell and all its polycarbonates are certified for grinding with the specific norms EN 166 B and EN 175 B. When selecting the Grind mode, all 4 arc sensors become desactivated and the GRIND LED flashes. The operator is then able to grind with a clear shade DIN 4.

• Dark Shade: DIN 9-13
• Clear Shade: DIN 4
• Switching Speed: 0.2ms
• Arc Sensors: 4
• Viewing Area: 93 x 43mm
• 160˚ Side Vision
• Optical Classes: 1/1/1/2
• Technology: Twisted Nematic
• Conforms to EN166B, 175B, 379
• Power: Solar
• Controls: Stepless
• Sensitivity & Delay: Yes
• Grinding: Yes – EN175B
• Total Weight: 458g
• Warranty: 2 Years

Kapio Red S4 Sales Literature Kapio Red S4 Manual