Hypertherm Powermax 45 XP CE/CCC Hand System 75° 6.1m Torch and CPC Port 400v

Easy to use

• Small size and light weight provide exceptional portability for a 16 mm (5/8″) rated cutting system.
• Patented drag-cutting technology makes the Powermax45 XP easy to use – even for first-time operators.
• Smart Sense™ technology ensures that air pressure is always correctly set.

Outstanding versatility

• CNC interface and FastConnect torch connection allows both handheld and mechanized operation.
• A wide range of torch and consumable styles to choose from for both handheld and automated processes.
• Extensive array of application capabilities via specialty consumables for fine feature cutting, extended reach cutting, gouging, precision gouging, and marking.

Maximum productivity

• Finish jobs faster, with cut speeds 1.5 times greater than oxyfuel on 6 mm (1/4″) mild steel.
• Superior cut and gouge quality reduces time for grinding and edge preparation.
• New torch disable switch feature allows faster, easier changeout of consumables.

Rugged and reliable

• Duramax® Lock torches are designed for high-impact and heat resistance.
• SpringStart™ technology ensures consistent starting and optimum torch performance.
• Hypertherm Certified™ reliability ensures peak performance even in the most demanding environments.

Designed for low environmental impact

• Plasma cutting efficiency is 11% better than its predecessor, enabling you to cut more steel with less power, in less time.
• All plasma system components are recyclable.
• 14% lighter than its predecessor and delivers more cutting power.

Warranty

• Power supply: 3-year
• Torch: 1-year

• Input voltages (± 10%)
  CE/CCC 230 V, 1-PH, 50–60 Hz
  400 V, 3-PH, 50–60 Hz
• Input current @ 6,5 kW
  CE/CCC 230 V, 1-PH, 33 A
  400 V, 3-PH, 10 A
• Output current 10–45 A
• Rated output voltage 145 VDC
• Duty cycle @ 40° C (104° F) 
  CE/CCC 50% @ 45 A, 230 V, 1-PH
  60% @ 41 A, 230 V, 1-PH
  100% @ 32 A, 230 V, 1-PH
  50% @ 45 A, 480 V, 3-PH
  60% @ 41 A, 480 V, 3-PH
  100% @ 32 A, 480 V, 3-PH
• Open circuit voltage (OCV)
  275 VDC (200–240 V, CSA/CE/CCC and 480 V, CSA)
  265 VDC (400 V CE/CCC)
• Dimensions with handles 442 mm (17.4″) D; 173 mm (6.8″) W; 357 mm (14.1″) H
• Weight with 6,1 m (20′) torch
  CE/CCC 15 kg (33 lbs.)
• Gas supply
  Cutting: air (clean, dry and oil-free), nitrogen, F5
  Gouging: air (clean, dry and oil-free), nitrogen, F5
  Marking: air (clean, dry and oil-free), argon
• Recommended gas inlet flow rate/pressure 188 l/min (400 scfh) @ 5,9 bar (90 psi)
• Input power cable length 3 m (10′)
• Power supply type Inverter – IGBT
• Engine drive requirement 12.5 kVA (10 kW) for full 45 A output
• Electrical efficiency 88%
• Recyclability 100%
• Certifications CE, RCM, CU/GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe
• Warranty
  Power supply: 3-year
  Torch: 1-year

Powermax 45 XP Sales Literature Powermax 45 XP Manual

Powermax Plasma Guide