Features and Applications
Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels.
Excellent impact toughness due to the addition of Nickel.
Good mechanical properties at sub-zero temperatures down to -50°C.
Especially suitable for use in the offshore industry.
Precision layer wound for superior wire feeding characteristics.
Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc.
Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612*
* Illustrative, not exhaustive list
|EN ISO 14341-A – G 3Ni1|
|AWS A5.28 – ER 80S-Ni1|
|Chemical Composition % (Typical)|
|Mechanical Properties (Typical)|
|Tensile Strength||600 MPa|
|Yield Strength||480 MPa|
|Impact Strength||100 J|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
|Ømm||Current (A)||Voltage (V)|
EN ISO 14175 – C1, M21, Argon + 1-5% O2
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.