Weld Star – ER 2594 Super Duplex TIG Wire (1.6mm) 5kg
Features and Applications
Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”.
Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments.
Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance.
This alloy is widely used in applications in which corrosion resistance is of the utmost importance.
Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372*
* Illustrative, not exhaustive list
|EN ISO 14343-A – W 25 9 4 N L|
|AWS A5.9 – ER 2594|
|Chemical Composition % (Typical)|
|Tensile Strength||≥620 MPa|
|Yield Strength||≥550 MPa|
|Impact Strength||≥50 J|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
EN ISO 14175 – TIG: I1 (Argon)
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.