Features and Applications
Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength.
The weld metal offers excellent resistance to stress corrosion, cracking and pitting.
Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205.
The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals.
Recommended working temperature ranges from cryogenic to 300°C.
Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
UNS S31803, UNS S32205, UNS S39209*
* Illustrative, not exhaustive list
|EN ISO 14343-A – W 22 9 3 N L|
|AWS A5.9 – ER 2209|
|Chemical Composition % (Typical)|
|Tensile Strength||≥550 MPa|
|Yield Strength||≥450 MPa|
|Impact Strength||≥50 J|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
EN ISO 14175 – TIG: I1 (Argon)
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.