Weld Star – ER 110S-G TIG Wire (3.2mm) 5kg
Features and Applications
A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels.
Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa.
Excellent impact strength at low temperatures down to -40°C.
Ideal for steels requiring tough weld metal for critical applications.
Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc.
Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.
Test Certificates can be found online @wilkinsonstar247.com
Typical Base Materials
T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.*
* Illustrative, not exhaustive list
|EN ISO 16834-A – Mn3Ni1CrMo|
|AWS A5.28 – ER 110S-G|
|Chemical Composition % (Typical)|
|Mechanical Properties (Typical)
|Tensile Strength||800 MPa|
|Yield Strength||750 MPa|
|Impact Strength||70 J|
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
EN ISO 14175 – TIG: I1 (Argon)
EN ISO 6947 – PA, PB, PC, PD, PE, PF
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.