Optrel Panoramaxx Quattro Headshield

£355.00

SKU: 1010.100 Category: Tag: Brand:

Product Description

General information

The Panoramaxx Quattro was developed for use in heavy metal construction, where work is often carried out with a lot of energy and in a wide variety of welding positions. Especially in constrained positions, there is no straight view of the welding point. Perfect viewing angle dependence, confirmed by the best test mark of 1 according to the EN 379 standard, guarantees that Panoramaxx quattro welders always have the best view of the welding process without manual adjustment of the protection level. This results in uninterrupted and fatigue-free working with improved performance.

In addition to the large field of vision and crystal-clear optics, which form an actual assistance system, all members of the Panoramaxx series are equipped with the latest digital electronics. The patented Shadetronic and Fadetronic technologies in combination with the 5-point sensor system and the re-charge energy concept are the core elements.

They enable welders to focus on their work and allow them to work without interruption. This results in quality and efficiency. Thanks to the ergonomic design of the perfectly fitting Optrel lsoFit® headgear, the Panoramaxx is light as a feather and fatigue-free. All Panoramaxx welding helmets are highly robust at the lowest weight and protect users against external mechanical impacts such as high speed particles which hit the helmet at up to 120 m/s. And thanks to grinding mode, which can be easily operated externally, and the incomparable appearance, even grinding work is more fun.

ShadeTronic®
Setting the correct shade level is the most important and at the same time the most neglected function on a welding helmet. This important task is performed by the patented Optrel ShadeTronic® technology. A highly
developed light sensor permanently measures the intensity of the welding arc and regulates the glare protection
in the active state continuously from protection level 4 to the maximum protection level 13 fully automatically. This
enables the welder to achieve optimum dimming and thus uninterrupted work at any welding light intensity. Experience the ShadeTronic® technology in the hot start at the beginning or during the crater filling function at the end of the welding process or simply when welding with different intensities.

FadeTronic
With the patented Optrel Fadetronic technology, the opening of the anti-glare display can be continuously adjusted
after welding. The unpleasant afterglow is faded out – especially for high ampere applications. Eye fatigue is significantly reduced thanks to the display opening smoothly and being adapted to the eye.

Optrel re-charge
The unique and environmentally-friendly Optrel re-charge energy concept ensures that welding helmets always
have enough energy. Thanks to the latest solar technology, a rechargeable lithium-polymer battery is recharged
either by the welding light or by the ambient light. In addition, the battery can also be charged directly with any USB
charger via a micro-USB interface. The tiresome changing of batteries is no longer necessary and the environment
is protected.

5-point Detection
The Optrel 5-point detection integrated in the Panoramaxx series is an intelligent sensor control with five sensors. Sophisticated software and clever positioning of four sensors at the corners and one sensor in the upper centre
ensures the glare shield is switched on and off perfectly, even in the most difficult lighting conditions and in constrained positions, as well as permanent dark level adjustment (Shadetronic®, patented) during welding.

Grinding mode
Like most Optrel welding helmets, the products in the Panoramaxx series have a grinding mode. It can be conveniently operated externally by means of a robust and well-protected pressure switch. Once activated, the anti-glare display remains deactivated, which guarantees trouble-free grinding work. At the touch of a button, the glare shield is then immediately ready for welding work. Your Optrel welding helmet becomes a true multifunctional work safety device.

 

Technical Specifications

Shade levels
ShadeTronic inactive: shade level 3.0
active, manual: shade levels 8-13
ShadeTronic 4-13 with individual calibration option ± 2.
Energy supplysolar cells, Li polymer battery pack, chargeable via Micro-USB
Battery life range300 to 500 charging cycles
SensoricFive sensors
Sensitivitycontinuously, new with “Super High” sensitivity
Switching timelight to dark:
0.090 ms at 20°C
0.070 ms at 55°C
dark to light:
0.1 s to 2.0 s (with FadeTronic)
Field of vision2.3 to 6.3 times bigger than a 100 x 50 mm standard ADF
Classification EN3791/1/1/1
Shape stabilityMask: up to 220°C
Front cover lens: up to 137°C
Eye protectionUV/IR protection: maximum protection at all shade levels
Operating temperature-10°C to + 55°C / 14°F to 131°F
Storage temperature-20°C to + 70°C / -4°F to 158°F
Weight575 g / 20.3 oz (PAPR 745g)
StandardsCE, ANSI, EAC, AS/NZS, compliant with CSA Z94.3, additionally with PAPR version EN 12941 (TH3) and suppliedair version EN 14594 (3B). Compliant with pr ISO 16321 standard „WIG+“ („low amp Tig“)
Scope of deliveryWelding helmet, optrel IsoFit® headgear, manual, bag, Micro USB cable, front cover lens, warranty card
Warrantyfrom date of purchase: 2 years for manufacturing and material defects, 6 months for battery
Warranty extension1 year additional (battery excluded) for online product registration within the first 6 months (from date of purchase) on optrel.com/register

DOWNLOADS

Panoramaxx Sales Literature

We use cookies to improve your experience, for more information see our Privacy Policy.