Hypertherm Powermax 125 CE Hand System with 85° and 15° 7.6m Torches – CPC Port 400v

Maximum productivity 

• Finish jobs faster with cut speeds five times greater than oxyfuel on 12 mm (1/2”) mild steel
• Superior cut and gouge quality let you spend less time on grinding and edge preparation
• 100% duty cycle maximizes your cutting time
• Multiple, easy-to-use torch styles let you tackle a wide variety of jobs using the same system

Easy-to-use for cutting and gouging

• No need to change the air pressure – Smart Sense™ technology ensures that it is always correctly set
• SpringStart™ technology ensures consistent starting and a more reliable torch
• Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting

Lower operating costs

• Consumable life up to four times longer than other systems in this amperage range
• Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused

Built to handle tough jobs

• Hypertherm Certified™ reliability ensures peak performance even in the harshest environments
• Duramax Hyamp torches are designed for high-impact and heat resistance

Warranty

• Power supply: 3-year
• Torch: 1-year

• Input voltages
  CE 400 V, 3-PH, 50/60 Hz
  CCC 380 V, 3-PH, 50/60 Hz
• Input current @ 21.9 kW 300/400/480/600 V, 38/36/31/24 A
• Output current 30–125 A
• Rated output voltage 175 VDC
• Duty cycle @ 40° C (104° F) 100% @ 125 A
• Open circuit voltage (OCV) 400 V CE: 305 VDC
• Dimensions with handles 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
• Weight with 7.6 m (25′) torch
  480 V, 47,9 kg (105.7 lbs.)
  600 V, 47,5 kg (104.7 lbs.)
  380 V, 45,2 kg (99.6 lbs.)
  400 V, 48,9 kg (107.8 lbs.)
• Gas supply Clean, dry, oil-free air or nitrogen
• Recommended gas inlet flow rate/pressure
  Cutting: 260 l/min (550 scfh) @ 5.9 bar (85 psi)
  Gouging: 212 l/min (450 scfh) @ 4.1 bar (60 psi)
• Input power cable length 3 m (10′)*
• Power supply type Inverter – IGBT
• Engine drive requirement 40 kW for full 125 A output
• Certifications CE, C-Tick, CU/GOST, Ukr, and Serbian – for use in Europe
• Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.

Powermax 125 Sales Literature   Powermax 125 Manual

Powermax Plasma Guide