Weld Star – ER 80S-G Corten TIG Wire 1.6mm 5kg
£64.00
Product Description
Features and Applications
Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels.
Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion.
This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications.
Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc.
Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.
Typical Base Materials
S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A – B1 ; TsT52.3, S355K2W
| Standards |
| EN ISO 636-A – W Z3Ni1 |
| AWS A5.28 – ER 80S-G |
| Chemical Composition % (Typical) | |||||
| C% | Si% | Mn% | P% | S% | Cu% |
| 0.08 | 0.80 | 1.40 | <0.020 | <0.020 | <0.40 |
| Cr% | Ni% | Mo% | Al% | V% | Zr+Ti% |
| 0.25 | 0.80 | <0.05 | <0.200 | <0.030 | <0.15 |
| Mechanical Properties (Typical) | ||
| Tensile Strength | 630 MPa | |
| Yield Strength | 550 MPa | |
| Elongation | 22% | |
| Impact Strength | 60 J | |
| Test Temperature | -40ºC | |
Shielding Gases
EN ISO 14175 – TIG: I1 (Argon)
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF