Exact PipeCut 170 System
The fastest, easiest and safest way to cut pipes, Portable and lightweight design, only 5.7 kilos, Range of use: 15 – 170 mm, Max pipe wall thickness: 6 mm for steel or 14 mm for plastics
- Voltage: 230 V / 50 Hz
- Power: 1010 W
- Available: 110 V / 50 Hz
- r.p.m: 4000 r/m
- Intermittent: S3 25 %
- Blade diameter: 140 mm
- Blade center bore: 62 mm
- Weight: 5.7 kg
- Range of use: 15 - 170 mm
- Max pipe wall thickness: 6 mm, plastics 14 mm
- PipeCut 170 Cutting Machine
- TCT Blade 140 x 62 (Fitted)
- Set of 4 x Pipe Support Rollers
- System Carry Case Holdall
- Hex Keys (5mm & 2mm)
- User Manual & DVD Video (Instructions & Demonstrations)
A Finished surface ready for installation
Exact PipeCut attaches to a pipe firmly. After attachment, the blade is always in the correct position automatically and does not need to be guided. The blade chips through a pipe rather than grinding it. This creates burr-free cut surfaces that are ready for jointing. Also, PipeCut does not generate dust or dangerous sparks.
Superior work comfort
The entire weight of Exact PipeCut rests on the pipe being cut, so using it is easy and safe, even in tight spaces. Only about a metre of wNoorking room is required. Heavy pipes need not to be lifted onto a work table, but can be cut at floor level. During operation, the saw is firmly attached to the pipe and cannot work itself loose from the operators grasp. Nor does it need to be supported or guided. Cutting small-diameter pipes to size is effortless and quick on a work table, too.
No fire hazard or collateral damage
The chips produced by an Exact PipeCut saw cool quickly and fall in the immediate vicinity of the cutting site without causing damage, even to sensitive surfaces. Minimal protection of the surrounding area is therefore required. The ease of use also improves work safety; no special skills or long-term training is needed to operate Exact PipeCut smoothly.
Versatile, handy and quick
Exact PipeCut pipe saws can cut a very wide range of sizes. Model 170 can be used to cut pipes with an outside diameter of 15-170mm. Model 170E has the same cutting range, but is more powerful, and the rotational speed of the blade can be adjusted according to the material being cut. Model 200 can be used for all pipes with an outside diameter of 15-200mm, and model 360U for all pipes diameters between 75-360mm. Exact PipeCut saws are suitable for cutting all types of pipe materials.
The Exact Pipecutting system is the fastest system on the market; for example, it takes about 35 seconds to cut DN 100 cast iron pipe with a PipeCut 170 using the diamond blade. Changing blades on Excat PipeCut saws is extremely simple and quick