ESAB Caddy TIG 2200i DC TA34 Tig Welder
The Esab CaddyTig 2200i represents Esab's 5th generation of portable welding machines and incorporates over 30 years experience of inverter technology. The result is a reliable, professional tool.
Connectors for welding leads are dinse type 35/50. The case work is a combination of impact resisting polymer and durable aluminium. It is light and easy to carry but does not compromise the important cooling of the internal components. Large heat sinks and intelligent design result in a cooler running machine with a longer life expectancy when used in harsh working environments. The design also ensures all sensitive parts are kept free of dirt and dust. Built to IP23 standards it can even be used outdoors in the rain.
Caddy Tig machines have a built in PFC circuit which makes it possible to use the full output of 220Amps on a 16A fuse. The PFC circuit also protects against fluctuating mains voltage and, therefore, makes them generator friendly.
The more advanced control panel Caddy® TA34 allows you to weld Pulsed TIG giving you better control of the heat input. It also has Micro Pulse which allows you to set pulse times down to 0,001s. Caddy TA34 has two memories where you can store all your settings and you can switch between the memories from the panel or from the torch trigger, even when welding. You can also set slope up/down, post-gas and connect a remote control.
Caddy Tig features ArcPlus 11 for arc welding which gives a more intense, yet smooth, stable easy-to-control arc. ArcPlus 11 generates smaller droplets - the arc burns more smoothly and there is no need to pause at the edges when weaving.
Esab Warranty is 2 Years Parts & Labour Power Source.
- 2200i Inverter Power Source with TA34 Control Panel
- 3m MMA Welding Leads
- Tig Torch THX200 4m
|Mains supply, V/Hz||230v AC Single Phase|
|Fuse, slow, A||16A|
|Mains cable, Ø mm2||3x2,5|
|Max output at 25% duty cycle at 40C MMA/TIG||170A/220A|
|Max output at 60% duty cycle at 40C MMA/TIG||130A/150A|
|Max output at 100% duty cycle at 40C MMA/TIG||110A/140A|
|Open circuit voltage, V||72V|
|Dimensions||418mmL x 188mmH x 208mmW|
|Recommended generator size kVA||12|
|Amperage setting range MMA/TIG||4-170A/3-220A|