Gen Set 400DK Static Diesel Welder Generator

MPM 15/400 I-K1U Static

Features

• Welding processes: SMAW / Tig
•  Arc Force Control switch
•  Remote control socket
•  Auto engine protection shutdown system with warning lights for:
  • Battery charger failure
  • Low fuel level
  • Low oil pressure
  • High water temperature
•  Automatic idle device when no load is connected
•  12V battery
•  Fuel level gauge
•  Hourmeter
•  Voltmeter
• Emergency stop button
•  Earth Leakage Circuit Breaker
•  Power output protection
•  1 x 32A 400V three-phase EEC socket
•  1 x 32A 230V single-phase EEC socket
•  1 x 32A 110V single-phase EEC socket
•  Auto / Idle switch
•  Engine oil drain pipe
•  Central lifting eye
•  Forklift-ready base

• Noise level: 98 LWA (73dB at 7m)
• DC welding Duty Cycle @ 35%: 370A – 35V
• Duty Cycle @ 40%: 400A – 29V
• Duty Cycle @ 60%: 350A – 34V
• Stepless control (CC mode): 30A – 400A
• Open Circuit Voltage: 70V
• Max welding rod: 6mm
• AC generator – 50Hz Type: Asynchronous, Self-Excited and Self Protected
• Three-phase power (standby): 15.0kVA – 400V
• Three-phase power (prime): 13.5kVA – 400V
• Single-phase power (max): 10.0kVA – 230V
• Single-phase power (max): 4.0kVA – 110V
• Power factor: cos w 0.8
• Diesel Engine – 3000 rpm Type: Kubota D1105-E – 3 cylinder – 1123 cm3
• Max power: 24.6 HP (18.1kWm)
• Starting system: Electric (12VDC)
• Cooling system: Water
• Fuel tank capacity: 38 litres
• Fuel consumption @ 75%: 4.9 litres/hour
• Insulation: Class H
• Ambient temperature: 40°C
• Altitude: 1000m
• Mechanical Protection: IP23
• Dimensions (L x W x H): 1590 x 730 x 920 mm
• Dry weight: 450kg

GEN-400 DK Sales Literature